For those who have a web site or maybe an application, rate of operation is extremely important. The faster your web site loads and also the faster your web applications operate, the better for you. Given that a website is just an assortment of files that interact with one another, the devices that keep and access these files play a crucial role in website performance.

Hard disk drives, or HDDs, were, until the past several years, the most efficient products for keeping information. Nevertheless, lately solid–state drives, or SSDs, are actually rising in popularity. Take a look at our evaluation chart to check out if HDDs or SSDs are more suitable for you.

1. Access Time

Image

SSD drives have a fresh & ingenious approach to file storage in accordance with the use of electronic interfaces rather than any sort of moving parts and spinning disks. This unique technology is considerably quicker, permitting a 0.1 millisecond data file accessibility time.

Image

HDD drives make use of rotating disks for files storage reasons. Every time a file will be used, you will need to wait for the appropriate disk to reach the right position for the laser to reach the data file you want. This ends in an average access speed of 5 to 8 milliseconds.

2. Random I/O Performance

Image

Because of the exact same revolutionary strategy allowing for quicker access times, you may as well take pleasure in greater I/O effectiveness with SSD drives. They are able to perform double the procedures within a given time as opposed to an HDD drive.

An SSD can manage at the least 6000 IO’s per second.

Image

Throughout the same lab tests, the HDD drives proved to be much slower, with simply 400 IO operations managed per second. Although this may seem like a great number, for those who have a hectic web server that serves loads of sought after sites, a slow hard disk can lead to slow–loading websites.

3. Reliability

Image

SSD drives are lacking any kind of moving parts, which means there is much less machinery included. And the fewer literally moving elements you can find, the lower the prospect of failing are going to be.

The average rate of failure of an SSD drive is 0.5%.

Image

HDD drives use spinning disks for keeping and reading data – a technology going back to the 1950s. Along with disks magnetically suspended in mid–air, rotating at 7200 rpm, the possibilities of one thing going wrong are usually higher.

The normal rate of failing of HDD drives varies amongst 2% and 5%.

4. Energy Conservation

Image

SSDs lack moving parts and need not much cooling down power. They also need very little electricity to function – tests have indicated that they can be powered by a regular AA battery.

As a whole, SSDs use up somewhere between 2 and 5 watts.

Image

As soon as they have been developed, HDDs were always extremely electric power–heavy products. So when you have a web server with lots of HDD drives, it will add to the per month power bill.

Normally, HDDs consume in between 6 and 15 watts.

5. CPU Power

Image

SSD drives allow for faster file accessibility rates, that, in turn, permit the processor to accomplish file queries much quicker and to return to different tasks.

The common I/O hold out for SSD drives is actually 1%.

Image

As compared with SSDs, HDDs permit not so quick data file accessibility speeds. The CPU will have to wait around for the HDD to send back the demanded data, scheduling its allocations while waiting.

The normal I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

In real life, SSDs carry out as wonderfully as they performed during the tests. We ran a full system back up using one of our production web servers. Through the backup operation, the regular service time for any I/O queries was basically below 20 ms.

Image

In contrast to SSD drives, HDDs provide significantly reduced service times for I/O requests. During a web server backup, the normal service time for any I/O query ranges somewhere between 400 and 500 ms.

7. Backup Rates

Image

It is possible to notice the real–world potential benefits to utilizing SSD drives on a daily basis. For instance, on a web server furnished with SSD drives, a complete data backup can take simply 6 hours.

Image

We applied HDDs exclusively for lots of years and we have very good understanding of exactly how an HDD functions. Creating a backup for a server equipped with HDD drives will take about 20 to 24 hours.

The accounts include SSD drives by default. Join our family here, at Leed Hosting, to check out the way we could help you transform your site.


  • Service guarantees

  •  
  • Join us today. There won’t be any installation fees and you will have full SSH/full root access to your server. 99.9% network uptime is guaranteed.
  • Contact Us

  •  
  • We are on duty for you 24x7 to answer any sort of questions in relation to our VPS Hosting services. 60–min reply time warranty.